Papers

Journal papers:

1- B.M. Imani, M.H. Sadeghi, M.A. Elbestawi, “An Improved Process Simulation System or Ball-End Milling of Sculptured Surfaces”, Int. J. of Machine Tools & Manufacture 38, 1998, P. 1089-1107

2- B.M. Imani, M. A. Elbestawi, “Geometric Simulation of Ball-End Milling Operations”, Transactions of the ASME, J. of Manufacturing Science & Engineering 123, 2001, P. 177-184

3- B.M. Imani, E. Layegh, “Comprehensive Simulation of Surface Texture for End-Milling Process”, Int. J. of Science & Technology, Scientia Irania, Sharif University of Technology, 15, 2008,

4- R. Salami, M.H. Sadeghi, B.M. Imani, “Feed Rate Optimization for 3-Axis Ball-End Milling of Sculptured Surfaces”, Int. J. of Machine Tools & Manufacture 47, 2007, P. 760-767

5- B.M. Imani, J. Jahanpour, “High-Speed Contouring Enhanced with P-H Curves”, Int. J. of Advanced Manufacturing Technology 37, 2008, P. 747-759

6- J. Jahanpour, B.M. Imani, “Real-Time P-H Curve CNC Interpolators for High Speed Cornering”, Int. J. of Advanced Manufacturing Technology 39, 2008, P. 302-316

7- B.M. Imani, M. Pour, “Tolerance Analysis of Flexible Kinematic Mechanism using DLM Method”, Elsevier Mechanism & Machine Theory 44, 2008, P. 445-456

8- B. M. Imani, M. H. Sadeghi, M. Kazemi, “Anticipation of Stability Limits for Two Degree of Freedom Interrupted Milling”, J. of Mechanics 25, 2009,

9- N.Z. Yussefian , B. M. Imani, H. El-Mounayri, “The Prediction of Cutting Force for Boring Process”, Int. J. of Machine Tools & Manufacture 48, 2008, P. 1387-1394

10- B. M. Imani, N.Z. Yussefian, “Dynamic Simulation of Boring Process”, Int. J. of Machine Tools & Manufacture, 2009,

11- B. M. Imani, M. H. Sadeghi, M. Kazemi, “Effects of Helix Angle Variations on Stability of Low Immersion Milling”, IUST int. J. of Engineering Science,

Conference Papers:

1- H.A. El-Mounayri, B.M. Imani, M.A. Elbestawi, A.D. Spence, “Closing the Gap between CAD/CAM and Machining Process Simulation: A Generic Solution”, Proc. 1997 ASME International Mechanical Engineering Congress and Exposition, 1997, Dallas, Texas

2- B.M. Imani, M.A. Elbestawi, “Scallop Height Control in Die Semi-Finishing Operation”, Proc. 29th CIRP International Seminar on Manufacturing Systems, 1997, Osaka University, Japan

3- B.M. Imani, “Geometric Simulation of Five-Axis Ball-End Milling”, 4th International Conference of Iranian Society of Mechanical Engineering (ISME 2000), May 16-19, 2000, Sharif University of Technology, Tehran, Iran

4- B.M. Imani, M. J. Barakchi Fard, “Feed and Acceleration Region Optimization during Milling along Free-Form Tool Path”, CANCAM 2003, June 01-06, 2003, University of Calgary, Department of Mechanical and Manufacturing Engineering, Canada

5- R. Salami, M.H. Sadeghi, B.M. Imani, “Dynamic Force Model for 3-Axis Ball-End Milling of Sculptured Surfaces”, Tehran International Congress on Manufacturing Engineering (TICME2005), December 12-15, 2005, Tarbiat Modares University, Tehran, Iran

6- B. M. Imani, S.A. Hosseini, “Dimensional and Geometrical Tolerance Analysis of Kinematic Assemblies”, Tehran International Congress on Manufacturing Engineering (TICME2005), December 12-15, 2005, Tarbiat Modares University, Tehran, Iran

7- B.M. Imani, E. Layegh, “Comprehensive Simulation of Surface Texture for End-Milling Process”, International Conference on Manufacturing and Material Processing (ICMM2006), March 14-15, 2006, University of Malaya, Kuala Lumpur, Malaysia

8- M. Kazemi, B. Jabbari Poor, M. H. Sadeghi, B.M. Imani, “Surface Integrity of Thin-Walled Titanium Parts Machined by Low Immersion Milling”, 4th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, June 21-23, 2007, Cesme, Turkey

9- M. Kazemi, B. Jabbari Poor, B B.M. Imani, M. H. Sadeghi, “Investigating Stability Limits in High Speed Milling of Titanium Thin-Walled Parts”, 4th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, June 21-23, 2007, Cesme , Turkey

10- B.M. Imani, A. Zarmehri, S.R. Haqshenas, “Predicting the Effects of Cam Manufacturing Errors on the Follower Motion”, CANCAM 2007, Ryerson University, Toronto, Canada

11- B.M. Imani, M. Pour, “Reduction of Position Error of Kinematic Mechanisms by Tolerance Analysis Method, Part I: Theory”, Conference on Applications and Design in Mechanical Engineering, October 25-26, 2007, Kangar, Perlis, Malaysia

12- B.M. Imani, M. Pour, “Reduction of Position Error of Kinematic Mechanisms by Tolerance Analysis Method, Part II: Implementation”, Conference on Applications and Design in Mechanical Engineering, October 25-26, 2007, Kangar, Perlis, Malaysia

13- B.M. Imani, S.A. Hosseini, A. Baghal Safa, “Identification of Tool Life and Wear Characteristics of HSS Tools Used in Turning of Ck45”, 2nd Tehran International Congress on Manufacturing Engineering (TICME2007), December 10-13, 2007, Iran University of Science and Technology, Tehran, Iran

14- B.M. Imani, H. El-Mounayri, S.A. Hosseini, “Analytical Chip Load Prediction for Rough End Mills”, 2nd Tehran International Congress on Manufacturing Engineering (TICME2007), December 10-13, 2007, Iran University of Science and Technology, Tehran, Iran

15- B.M. Imani, M. Pour, “Position Error Reduction of Kinematic Mechanisms Using Tolerance Analysis and Cost Function”, 2nd Tehran International Congress on Manufacturing Engineering (TICME2007), December 10-13, 2007, Iran University of Science and Technology, Tehran, Iran

16- B.M. Imani, J. Jahanpour, “Implementing P-H High Speed Cornering Method on P-PI Servo Controller with Backlash”, 2nd Tehran International Congress on Manufacturing Engineering (TICME2007), December 10-13, 2007, Iran University of Science and Technology, Tehran, Iran ­

17- B.M. Imani, N.Z. Yussefian, “Cutting Force Simulation of Machining with Nose Radius Tools”, International Conference on Smart Manufacturing Application (ICSMA2008), April 9-11, 2008, KINTEX(Korea International Exhibition Center), Gyeonggi-do, KOREA ­

18- B.M. Imani, M. Fallah, ''Statistical Tolerance Analysis of Aerospace Sheet Metal Assemblies'', proceeding of the 7th Iranian Aerospace Society Conference, Feb. 19-21, 2008,Sharif University of Technology, Tehran, Iran.­

19- B.M. Imani, S.A. Hashemian, ''Developing Computer-Based 2D Tolerance Analysis Procedure,'' Proceedings of 26th International Conference of CAD/CAM, Robotics & Factories of the Future (CARs&FOF 2011), July 26-28, 2011, Kuala Lumpur, Malaysia.­

20- B.M. Imani, S.A. Hashemian, ''2D Profile Reconstruction using Constrained Local Fitting of NURBS Curves," Proceedings of 26th International Conference of CAD/CAM, Robotics & Factories of the Future (CARs&FOF 2011), July 26-28, 2011, Kuala Lumpur, Malaysia.